View DF1EA-2EP-25C00_6731111.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 2.5mm p it c h c onnector f or f ull l o c k and d iscrete w ire c onnection df1e series 8. correspond to a utomatic i nsertion m achine the radial tape packaging is provided for 2 to 8 contacts on the straight pin header side, in order to correspond to mass production. 9. various a pplications with the same series, various applications can be used for the board solder dip type and in- line. applications electronic equipment, office machines, industrial equipment, and consumer equipment, and so on features 1. full l ock f unction a dded the inner lock system adopts a full lock mechanism. this mechanism prevents disengagement to occur due to an unexpected external shock. 2. increase in c rimping c ontact f ixation f orce and s emi-insertion p revention the double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact. 3. mold l ance a dopted since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted. 4. mis-insertion p revention equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts. 5. means to p revent s older c rack the glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression. 6. correspond to p otting corresponding to potting, the pin header is provided for product variations. corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved. 7. production f acility c ost r eduction the female crimping contact uses the df1b series crimping contact, which has been conventionally marketed. investment for new facilities isn't needed. however, if the retainer is installed in the cable with awg#22 or more wire, use the df1e crimping contact. the female crimping contact for in-line is used together with the df1b applicator. therefore, no investment is needed for new facilities. full lock function added double lock engaged inner-lock system full lock mechanism mis-insertion prevention double lock engaged
2 rating p r oducts s pecifications rated c urrent n ote 1. awg # 20 ~ 24 : 3a 26 : 2a 28 : 1a 30 : 0.5a rated v oltage ac250v operating t emperature r ang e - 35 ~ + 85 ? note 2. o perating m oisture r ang e - 40~80% storage t emperature r ange - 10 ~ + 60 ? n ote 3. storage m oisture r ang e - 40~70% item specification condition 1. contact r esistance 30m ? max. measured at 20mv max. and 1ma 2. insulation r esistance 1000 m ? min. measured at 500v dc 3. withstand voltage neither short or breakdown 150v ac energized for 1 minute 4. single i nsert i o n / e xtraction f or ce min 0.4n, max 4.4n measured at the square steel pin with 0.63 5 0.002 5. operating l ife 30m ? max 30 cycles of insertions/extractions 6. vibration electrical discontinuity, 1 s max. 1 0 ~ 55hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively. 7. shock electrical discontinuity, 1 s max. 490m/s and 11ms, sin/cosine 3 directions, 3 times, respectively 8. moisture r esistance 30 m ? max exposed to temperatur e 402? and humidity 90 ~ 95% for 96 hours 9. temperature c ycle 30m ? max. (-55 ? : 30 minutes-> 5~35 ? : 5 minutes-> 85 ? : 30 minutes-> 5~35 ? : 5 minutes) 5 cicles 10. resistance to s oldering heat neither deformation on the appearance nor remarkable contact backlash is found. reflow: 250 ? : 20 seconds manual soldering: s oldering iron temperature: 30 0 ? for 3 seconds note 1 : temperature rise included when energized note 2 : this storage indicates a long-term storage state for the unused product before the board mounted. the operating temperature and moisture ranges are applied to the non-energized state after the connector has been installed to the board. note 3 : the above standards represent this series. individual formal agreement should be based on the "specification". note : the whisker method is implemented for hrs tin plating. material product part material treatment remarks socket insulator polyamide white ul94v-0 header insulator polyamide beige ul94v-0 contact brass solder plating in-line plug insulator polyamide white ul94v-0 retainer insulator polyamide black ul94v-0 crimping contact contact phosphor copper tin plating
3 o r dering i n f ormation df 1e c - p - 2.5 dsa qw r etyu y pin h eader q series n ame : df w series no. : 1e e hold types r number of contacts : 2 to 15 contacts t connector type p : pin header y contact pitch : 2.5mm u form type dsa : straight dip ds : right angle type c standard product with boss without boss g potting with boss without boss note 1 : the right angle pin header has no symbol. note 2 : the potting header has 2 to 10 contacts. note 1 : when the retainer is used, use df1e-2022sc(f), df1b- 2428sc(f), and df1b-30sc(f) contacts. note 1 : when no retainer is used, all df1b- sc(f) and df1e- 2022sc(f) contacts can be used. df 1e - s - 2.5 c qw r ey t socket q series n ame : df w series no. : 1e e number of contacts : 2 to 15 contacts r connector type s: socket t contact pitch : 2.5mm y form type c : crimping socket df 1e - rs / p - 2.5 qw et r retainer q series n ame : df w series no. : 1e e number of contacts : 2 to 10 contacts r connector type rs/p : retainer commonly used for socket and in-line plug t contacts pitch:2.5mm df 1e a - ep - 2.5 c qw r eu t in-line p lug q series n ame : df w series no. : 1e e in-line plug type none: with panel mount lock a : without panel mount lock r number of contacts : 2 to 10 contacts t ep : in-line plug y contact pitch : 2.5mm u form type c : crimping socket df 1e - scf qw e r crimping c ontact q series n ame : df w series no. : socket side : 1b (note 1) 1e (note 1) plug side : 1e e applicable cable size 2022 : awg # 20 ~# 22 2428 : wg # 24 ~# 28 30 : awg # 30 r packaging type scf : female contact : reel sf : female contact : bag pcf : male contact : reel pc : male contact : bag
4 application p attern pin h eader straight t ype right a ngle t ype relay p lug in-line p lug ( p anel m ount l ock t ype) photo: c ontact inserted in-line p lug photo: c ontact inserted retainer socket photo : contact inserted straight p otting t ype
5 right a ngle p in h eader b pcb f ootprints (boa r d t hi c kness t = 1.6 0.1) the symbol included in hrs no. and the product spec no. indicates the specific no. note 1. : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, the quantity for delivery will be changed according to the specific no. note 2. : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. note 3. : styles of 2 to 4 contact connectors partially differ from those in above figures. product no. number of contacts a b hrs no. p = 2.50.05 a0.1 C ?1.1 + 0.1 0 contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.2 5.9 0.5 6.95 8 10.8 13.8 4.5 8.3 2.9 m 0.64 note 2 contact no.1 indicated 10 a df1e C 0 2pC2.5ds() df1e C 0 3pC2.5ds() df1e C 0 4pC2.5ds() df1e C 0 5pC2.5ds() df1e C 0 6pC2.5ds() df1e C 0 7pC2.5ds() df1e C 0 8pC2.5ds() df1e C 0 9pC2.5ds() df1e C10pC2.5ds() df1e C11pC2.5ds() df1e C12pC2.5ds() df1e C13pC2.5ds() df1e C14pC2.5ds() df1e C15pC2.5ds() cl541 C 0985C 0 C cl541 C 0986C 3 C cl541 C 0987C 6 C cl541 C 0988C 9 C cl541 C 0989C 1 C cl541 C 0990C 0 C cl541 C 0991C 3 C cl541 C 0992C 6 C cl541 C 0993C 9 C cl541 C 0994C 1 C cl541 C 0995C 4 C cl541 C 0996C 7 C cl541 C 0997C 0 C cl541 C 0998C 2 C 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0
6 straight p in h eader b pcb f ootprints ( b oa r d t hi c kness t = 1.6 0.1) the symbol included in hrs no. and the product spec no. indicates the specific no. note 1. : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, the quantity for delivery will be changed according to the specific no. note 2. : the 2 to 4 contacts differ in two convex portions from those in above figures. the 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. note 3. : styles of 2 to 4 contacts partially differ from those in above figures. note 4. : the radial package is prepared for df1ec- p-2.5dsa(25).however, 2 to 8 contacts only are provided. (quantity of packaged 2 and 3 contacts: 1000pcs., 4 to 8 contacts: 400pcs.) product no. number of contacts a b hrs no. p = 2.50.05 a0.1 C ?1.1 +0.1 0 8.3 4.5 0.5 6.95 8 contact no.1 indicated note 2 5.9 contact no. mark 5.4 p = 2.5 a b mold cavity no. mark 3.6 m 0.64 10.8 3.2 10 a df1ecC 0 2pC2.5dsa() df1ecC 0 3pC2.5dsa() df1ecC 0 4pC2.5dsa() df1ecC 0 5pC2.5dsa() df1ecC 0 6pC2.5dsa() df1ecC 0 7pC2.5dsa() df1ecC 0 8pC2.5dsa() df1ecC 0 9pC2.5dsa() df1ecC10pC2.5dsa() df1ecC11pC2.5dsa() df1ecC12pC2.5dsa() df1ecC13pC2.5dsa() df1ecC14pC2.5dsa() df1ecC15pC2.5dsa() cl541C 0867C 4 C cl541C 0868C 7 C cl541C 0869C 0 C cl541C 0870C 9 C cl541C 0871C 1 C cl541C 0872C 4 C cl541C 0873C 7 C cl541C 0874C 0 C cl541C 0875C 2 C cl541C 0876C 5 C cl541C 0877C 8 C cl541C 0878C 0 C cl541C 0879C 3 C cl541C 0880C 2 C 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0
7 straight p in h eader f or p otting b pcb f ootprints ( b oa r d t hi c kness t = 1.6 0.1) the symbol included in hrs no. and the product spec no. indicates the specific no. note 1. : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the product per bag. however, the quantity for delivery will be changed according to spec number. note 2. : the 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. the 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. note 3. : styles of 2 to 4 contact may partially differ from the above figures. note 4. : the radial tape packaging is prepared for df1eg- p-2.5dsa(25).however, 2 to 8 contacts are available. (quantity of packaged 2 and 3 contacts : 1000pcs., 4 to 8 contacts: 400pcs.) product no. number of contacts a b c hrs no. p = 2.50.05 a0.1 C ?1.1 +0.1 0 6.95 c 4.5 8.3 note 2 5.9 contact no. mark 5.4 p= 2.5 a b mold cavity no. mark 3 m 0.64 16.3 contact no.1 indicated note 2 3.2 10 a df1eg C 0 2pC2.5dsa() df1eg C 0 3pC2.5dsa() df1eg C 0 4pC2.5dsa() df1eg C 0 5pC2.5dsa() df1eg C 0 6pC2.5dsa() df1eg C 0 7pC2.5dsa() df1eg C 0 8pC2.5dsa() df1eg C 0 9pC2.5dsa() df1eg C10pC2.5dsa() df1eg C11pC2.5dsa() cl541 C 0923 C 3 cl541 C 0924 C 6 cl541 C 0925 C 9 cl541 C 0926 C 1 cl541 C 0927 C 4 cl541 C 0928 C 7 cl541 C 0929 C 0 cl541 C 0930 C 9 cl541 C 0931 C 1 cl541 C 0932 C 4 2 3 4 5 6 7 8 9 10 11 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 7.8 7.8 7.8 8.0 8.0 8.0 8.0 8.0 8.0 8.0
4.20.05 8.4 +0.1 0 1.1 5.8 d ( e + 3.5 +0.1 0 panel note 4 +0.1 0 +0.1 0 +0.2 0 +0.1 0 8 in-line p lug ( p anel m ount l o c k t ype) b p anel c ut - outs the symbol included in hrs no. and the product spec no. indicates the specific no. note 1. : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, the quantity for delivery will be changed according to the specific no. note 2. : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3. in regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. note 4. use the no radius side at the panel edge in the looking area. note 5. : panel fixation is loosened. (may be enlarged according to the panel board thickness.) note 6. : styles of 2 to 4 contact partially differ from those in the above figures. * refer to page b122 for the retainer. product no. number of contacts a b c d e hrs no. note 3 note 2 3 579 10 1 p = 2.5 b a 2.8 2.8 8.1 6.9 18.8 12 c 0.9 contact no.1 indicated contact no.1 indicated contact no. indicated contact no. mark mold cavity no. mark a 1 0 df1eC 0 2epC2.5c() df1eC 0 3epC2.5c() df1eC 0 4epC2.5c() df1eC 0 5epC2.5c() df1eC 0 6epC2.5c() df1eC 0 7epC2.5c() df1eC 0 8epC2.5c() df1eC 0 9epC2.5c() df1eC10epC2.5c() cl541C 0943C 0 C cl541C 0944C 3 C cl541C 0945C 6 C cl541C 0946C 9 C cl541C 0947C 1 C cl541C 0948C 4 C cl541C 0949C 7 C cl541C 0950C 6 C cl541C 0951C 9 C 2 3 4 5 6 7 8 9 10 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 photo: c ontact i nserted. 1.7~2.0 1.3~1.6 0.9~1.2 0.7~0.8 panel thickness 1.5 1.0 0.5 0.0 x
9 in-line p lug the symbol included in hrs no. and the product spec no. indicate a specific no. note 1. : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, the quantity for delivery will be changed according to the specific no. note 2. : in regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. note 4. : styles of 2 to 4 contacts partially differ from the above figures. * refer to page b122 for retainer. product no. number of contacts a b hrs no. note 3 note 2 3 579 1 0 1 p = 2.5 b a 8.1 6.9 18.8 0.9 contact no.1 indicated contact no.1 indicated contact no. mark contact no. mark mold cavity no. mark a 1 0 df1ea C 0 2epC2.5c() df1ea C 0 3epC2.5c() df1ea C 0 4epC2.5c() df1ea C 0 5epC2.5c() df1ea C 0 6epC2.5c() df1ea C 0 7epC2.5c() df1ea C 0 8epC2.5c() df1ea C 0 9epC2.5c() df1ea C10epC2.5c() cl541 C 0957 C 5 C cl541 C 0958 C 8 C cl541 C 0959 C 0 C cl541 C 0960 C 0 C cl541 C 0961 C 2 C cl541 C 0962 C 5 C cl541 C 0963 C 8 C cl541 C 0964 C 0 C cl541 C 0965 C 3 C 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 photo: contact inserted
10 socket the symbol included in hrs no. and the product spec no. indicate a specific no. note 1. : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, the quantity for delivery will be changed according to spec number. note 2. : the 2 contact connector is equipped with the convex portion to prevent false-insertion. note 3. : the 2 consult has no wall on the locking side note 4. : the 2 to 5 contacts contain the retainer fixed convex portions at both ends. * refer to page b122 for the retainer. product no. number of contacts a b c hrs no. 7.55 no. 1 contact indicated contact no. mark note 4 mold cavity no. mark p = 2.5 a 4.55 c b 8.5 11.8 note 3 note 3 note 4 note 2 a 10 1 df1e C 0 2sC2.5c() df1e C 0 3sC2.5c() df1e C 0 4sC2.5c() df1e C 0 5sC2.5c() df1e C 0 6sC2.5c() df1e C 0 7sC2.5c() df1e C 0 8sC2.5c() df1e C 0 9sC2.5c() df1e C10sC2.5c() df1e C11sC2.5c() df1e C12sC2.5c() df1e C13dC2.5c() df1e C14sC2.5c() df1e C15sC2.5c() cl541 C 0811 C 0 C cl541 C 0812 C 2 C cl541 C 0813 C 5 C cl541 C 0814 C 8 C cl541 C 0815 C 0 C cl541 C 0816 C 3 C cl541 C 0817 C 6 C cl541 C 0818 C 9 C cl541 C 0819 C 1 C cl541 C 0820 C 0 C cl541 C 0821 C 3 C cl541 C 0822 C 6 C cl541 C 0823 C 9 C cl541 C 0824 C 1 C 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5 0 5.4 0 7.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9 photo: contact inserted
11 retainer the symbol included in hrs no. and the product spec no. indicates the specific no. note 1. : a packaging quantity is delivered by the bag unit (100 pcs.). if needed, please order the products per bag. however, the quantity for delivery will be changed according to spec number. note 2. : the 2 to 4 contacts contain socket and plug fixed holes at both ends. * this retainer can be used together with the socket and relay plug. product no. number of contacts a b hrs no. mold cavity no. mark contact no. mark 1.9 a p = 2.5 b 1.5 5.9 3.3 0.7 1.7 note2 note2 1 0 a df1e C 0 2rs/pC2.5() df1e C 0 3rs/pC2.5() df1e C 0 4rs/pC2.5() df1e C 0 5rs/pC2.5() df1e C 0 6rs/pC2.5() df1e C 0 7rs/pC2.5() df1e C 0 8rs/pC2.5() df1e C 0 9rs/pC2.5() df1e C10rs/pC2.5() cl541 C 0971 C 6 cl541 C 0972 C 9 cl541 C 0973 C 1 cl541 C 0974 C 4 cl541 C 0975 C 7 cl541 C 0976 C 0 cl541 C 0977 C 2 cl541 C 0978 C 5 cl541 C 0979 C 8 2 3 4 5 6 7 8 9 10 0 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 0 2.5 0 5.0 0 7.5 10.0 12.5 15.0 17.5 20.0 22.5
12 plug c rimping c ontact product no. df1e C 2022pcf df1e C 2022pc df1e C 2428pcf df1e C 2428pc df1e C 30pcf df1e C 30pc cl541 C 0937 C 8 cl541 C 0938 C 0 cl541 C 0939 C 3 cl541 C 0940 C 2 cl541 C 0941 C 5 cl541 C 0942 C 8 20 22 24 28 30 awg # 20 awg # 22 awg # 24 awg # 28 awg # 30 1.2~1.9mm 0.9~1.5mm 0.6~1.2mm reel bag reel bag reel bag 10,000 100 10,000 100 10,000 100 applicable cable indication applicable cable awg jacket diameter hrs no. packaging type quantity crimping c ontact e xtraction t ool df-c-po(b) awg # 20 (21 cores./0.18mm) awg # 22 (17 cores./0.16mm) awg # 24 (11 cores./0.16mm) awg # 26 ( 0 7 cores./0.16mm) awg # 28 ( 0 7 cores./0.127mm) awg # 30 ( 0 7 cores./0.1mm) conductor size (wire construction) applicable c able ( t in plating annealed copper wire) recommended c able ul1061, ul1007 strip l ength 3.0~3.7mm note : if other cables are used instead of the applicable cable, contact hirose sales department. 6.5 14.9 2.2 1.2 0.8 2.2 0.64 0.64 1.5 19.9
1 3 so c ket c rimping c ontact product no. df1e C 2022scf df1e C 2022sc df1b C 2022scf df1b C 2022sc df1b C 2428scf df1b C 2428sc df1b C 30scf df1b C 30sc cl541 C 0999 C 5 cl541 C 1000 C 2 cl541 C 0223 C 1 cl541 C 0224 C 4 cl541 C 0678 C 1 cl541 C 0679 C 4 cl541 C 0682 C 9 cl541 C 0683 C 1 20 22 20 22 24 28 30 awg # 20 awg # 22 awg # 20 awg # 22 awg # 24 awg # 28 awg # 30 1.2~1.9mm 1.2~1.9mm 0.9~1.5mm 0.6~1.2mm reel bag reel bag reel bag reel bag 10,000 100 10,000 100 10,000 100 10,000 100 applicable cable indication applicable cable awg jacket diameter hrs no. packaging type quantity crimping c ontact e xtraction t ool df-c-po(b) awg # 20 (21 cores./0.18mm) awg # 22 (17 cores./0.16mm) awg # 24 (11 cores./0.16mm) awg # 26 ( 0 7 cores./0.16mm) awg # 28 ( 0 7 cores./0.127mm) awg # 30 ( 0 7 cores./0.1mm) conductor size (wire construction) applicable c able ( t in plating annealed copper wire) recommended c able ul1061, ul1007 strip l ength 2.0mm~2.5mm note : if other cables are used instead of the applicable cable, consult hirose sales department. df1e-2022scf df1b - * * * * scf 1.6 1.95 applicable cable indicated 1.95 2.55 3.35 12.9 9.4 1.4 0.83 1.75 0.55 1.4 14 6.1 2.5 9.5 1 1.6 0.975 1.75 applicable cable indicated 1.4 2.4
1 4 b crimping t ools product no. ap105 C df1e C 2022s ap105 C df1b C 2022s k k ap105 C df1b C 2428s k k ap105 C df1b C 30s k k ap105 C df1b C 2022p k k ap105 C df1b C 2428p k k ap105 C df1b C 30p k k cm C 105 k k ht102/df1e C 2022s df1b C ta2022shc k k df1b C ta2428shc k k df1b C ta30shc k k ht102/df1be C 2022p ht102/df1be C 2428p ht102/df1be C 30p df c po (b) cl901 C 4561 C 0 cl901 C 4510 C 9 cl901 C 4518 C 0 cl901 C 4517 C 8 cl901 C 4509 C 0 cl901 C 4521 C 5 cl901 C 4519 C 3 cl901 C 0005 C 4 cl550 C 0277 C 1 cl550 C 0182 C 7 cl550 C 0209 C 1 cl550 C 0211 C 3 cl550 C 0278 C 4 cl550 C 0279 C 7 cl550 C 0280 C 6 cl550 C 0179 C 2 df1e C 2022scf df1b C 2022scf df1b C 2428scf df1b C 30scf df1e C 2022pcf df1e C 2428pcf df1e C 30pcf CCCCCC df1e C 2022sc df1b C 2022sc df1b C 2428sc df1b C 30sc df1e C 2022pc df1e C 2428pc df1e C 30pcf df1e C 2022sc (f) df1b C * * * * sc (f) df1e C * * * * pc (f) hrs no. applicable contact item applicator main press unit manual crimping tool contact extraction tool note 1. : add " k k " to the last number of the product, in order to use df1b series tools, which have been conventionally merchandized. note 2. : f any trouble has occurred due to other tools, which are not designated by hirose, hirose won't guarantee any products.
1 5 b application p attern standard h eader header for p otting panel m ounting lock in-line plug in-line p lug 3.7 df1e _ s _ 2.5 c df1e# _ p _ 2.5 dsa df1e _ rs / p _ 2.5 df1e _ s _ 2.5 c df1e _ p _ 2.5 ds df1e _ rs / p _ 2.5 18.8 17.3 10.8 3 14.3 8.5 8.5 14.3 15.8 8 3.2 8 m a x potting resin df1e _ s _ 2.5 c df1e _ rs / p _ 2.5 df1e# _ p _ 2.5 dsa 11.7 21.3 19.8 8.1 df1e _ rs / p _ 2.5 df1e _ s _ 2.5 c df1e _ ep _ 2.5 c df1e _ rs / p _ 2.5 25.3 22.3 17 15.5 9 df1e _ rs / p _ 2.5 df1e _ s _ 2.5 c df1ea _ ep _ 2.5 c df1e _ rs / p _ 2.5 25.3 9 22.3 panel
b127 b precautions f or u se 1. recommended s oldering c ondition : flow c ondition with a utomatic s older m achine soldering temperature: 25 5 ? , s oldering time: w ithin 3 seconds manual s oldering c ondition soldering temperature: 290 10 ? , s oldering time: w ithin 2 seconds 2. cleaning c ondition : refer to the "nylon connector instruction manual" contained in the other nylon connector catalog. however, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. 3. connection c ondition : refer to the "nylon connector instruction manual" contained in the other nylon connector catalog. 4. cautions : to remove the connector, if the connector is forcedly removed, it will cause connector damage. if the connector is hardly removed, slightly push the connector once, and then remove it using the lock. in some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. in this case, it is recommended to use the retainer. if the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. the color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance.

▲Up To Search▲

Price & Availability of DF1EA-2EP-25C00

	To Download DF1EA-2EP-25C00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .